Thinking To Purchase A 100ft Ethernet Cable? However How These Cables Are Produced? What Procedures Are Involved? Please Check Out This Brief Article.
You might be thinking of shopping for a 100ft Ethernet cable to allow you to build a network in your own home or for your enterprise. Yet, you may be surprised what exactly is actually required when it comes regarding construction of the durable core cables that are the kinds more routinely used. The reason for utilizing solid core instead than stranded cables for the Ethernet is the fact they tend to be much more durable.
So which are the processes engaged in the building of a 100ft Ethernet cable? Below we take a quick look at some of them.
Process 1 - Copper Rod Breakdown
5000 lb. coils of copper are shipped to the manufacturer as soon as supplied the copper on the coils will be drawn through a diamond die this will help to minimize the diameter of the copper. Initially it starts out at 12 gauge yet after being drawn through it ends up as 10 gauge. Once it is reached this phase it is then stacked into stem packs prior to being drawn further to reduce its gauge even more. During this second drawing process an electrical current is passed via it and it anneals the copper so softening it. After that after being annealed it will be cooled down before passing through a laser system to measure and ensure it is within the manufacturers requirements.
Process 2 - Copper Insulation
This technique is carefully monitored and controlled and after the copper wire has been insulated it is passed thru water to cool it. This also helps to harden the jacket now surrounding the cable.
Process 3 - Twisting of Copper Wire
It is this procedure that helps to minimize the amount of cross talk that could happen among isolate wires. Occasionally to prevent this further whenever it comes to CAT 6 100ft Ethernet cable a centre spline (wire separator) is utilized. The twisting of the wire is achieved by passing it through several faceplates.
Process 4 - Coating of Cable
This method is also called as jacketing and the type of plastic that is employed to coat the cable to shield it depends on the Category of Ethernet cable being made. For both CAT 5e, CAT 6 as well as CAT 3 100ft Ethernet cables then a PVC (Polyvinyl Chloride) or Black Polythene plastic will be used.
Related Articles
Resources
